services sawing1

Sawing
The logs are graded and then sawn into four-sided cuts and side cuts. Side cuts are put through further processing, while the four-sided cuts are checked for quality and quantity. The timber is then going to dryers or get packaged and made ready for shipping. We are able to cut exact lengths (+/- 1 mm).
Annual logs consumption - 50 000 m3. Diameter 18 - 40cm. Wide variety of possible sizes both for construction and furniture.

Drying
services drying

We can offer the whole range of drying processes – from 10% HF heat treatment right up to HTR 30 treatment (the IPPC standard for packaging wood with its special requirements). We do all this with great awareness for the environment, using our waste (bark, chippings or shavings) as an environmentally friendly source of energy for our drying chambers. 



Planing
services planningRough timber is processed when it is dry. Special moulds are available for all areas where wood is used, including softwood timber in all grades, planed and rough, tongue and grooved, etc.
TIMBERTIME Ltd offer wide choice of profiles for carcassing needs S4S or PAR, roof battens, cladding and decking to customer demands.
Annual planing capacity - 25 000 m3

 

 

 

Impregnation

servicesImpregnation
The two types of pressure treated timbers we offer are TANALISED E and TANATONE.
TANALISED E has a natural pale green coloration, whilst TANATONE has a built-in rich brown tone.
PRESSURE TREATED TIMBER (Suitable for classes 1,2,3 & 4)
TANALISED E pressure treated timber has been impregnated with TANALITH E, a waterborne product based on copper triazole technology. Copper is derived from recycled sources and triazoles are organic biodegradable biocides, commonly used to protect many of the food crops we eat. TANALISED E pressure treated timber is usually specified for both in and out of ground contact applications where there is a medium to high risk of decay or insect attack.

We offer complex processing of timber:

  • Timber drying to different moisture (from 10%)
  • Timber impregnation (Green or Brown)
  • Timber grading according to the clients requirements (Strenght C16/C24 or Nordic Blue book SF)
  • Timber planing / profiling
  • Timber length packaging
  • Finished product delivery to the client’s given address